ওয়াট থেকে অ্যাম্পিয়ার ক্যালকুলেটর
কারেন্ট প্রবাহ বের করতে আপনার পাওয়ার ওয়াটে এবং সিস্টেম ভোল্টেজ লিখুন। লাইটিং সিস্টেম, ছোট গৃহস্থালী যন্ত্রপাতি এবং কম-পাওয়ার ইলেকট্রনিক্সের জন্য আদর্শ।
সার্কিট প্যারামিটার
ওয়াট → অ্যাম্পিয়ার
নিরাপদ কারেন্ট মাত্রা তার অতিরিক্ত গরম হওয়া রোধ করতে সাহায্য করে।
রূপান্তর সূত্র
ওয়াট থেকে অ্যাম্পিয়ার রূপান্তরের জন্য সার্কিট ভোল্টেজ জানা প্রয়োজন — এবং AC সিস্টেমের জন্য পাওয়ার ফ্যাক্টরও।
DC সিস্টেম
I = W ÷ V ওহমের সূত্রের সবচেয়ে সহজ রূপ — যেকোনো DC সার্কিটে অ্যাম্পিয়ার পেতে ওয়াটকে ভোল্ট দিয়ে ভাগ করুন।
১-ফেজ AC
I = W ÷ (V × PF) 1.0 এর কম পাওয়ার ফ্যাক্টরযুক্ত AC লোড তাদের ওয়াট রেটিং এর চেয়ে বেশি কারেন্ট টানে — রিঅ্যাকটিভ উপাদানের কারণে।
৩-ফেজ AC
I = W ÷ (√3 × V × PF) থ্রি-ফেজ সিস্টেম তিনটি ফেজের মধ্যে পাওয়ার বিতরণ করে — লাইন-টু-লাইন ভোল্টেজ রূপান্তরের জন্য √3 ফ্যাক্টর বাধ্যতামূলক।
How to Convert Watts to Amps
The watts-to-amps conversion is one of the most frequently used calculations in electrical work — from selecting the right fuse for an electronics project to sizing a circuit breaker for a household appliance. Watts measure real power consumed; amps measure the current flowing through the conductor. You need voltage (and power factor for AC) to bridge the two.
Watts vs. VA: What's the Difference?
Watts (W) measure real power — the energy actually converted to heat, light, or motion. Volt-Amperes (VA) measure apparent power — what the source must supply, including reactive current. For resistive loads (heaters, incandescent bulbs) they're equal. For inductive loads (motors, transformers), VA is always higher than watts.
Common Household Examples
- 1500W Space Heater at 120V DC: 1500 ÷ 120 = 12.5A. Needs a 15A circuit at minimum.
- 800W Microwave at 120V AC (PF 0.95): 800 ÷ (120 × 0.95) ≈ 7.0A. Comfortably fits a 15A circuit.
- 3000W Dryer at 240V AC (PF 1.0): 3000 ÷ 240 = 12.5A — typically wired on a 30A circuit to allow for startup transients.
Step-by-Step Conversion
- Find the Wattage: Check the device label, user manual, or measured consumption with a watt meter.
- Confirm the Voltage: Use the outlet voltage — 120V or 240V in North America; 230V in Europe.
- Apply the Power Factor: Use 1.0 for pure resistive loads (heaters, light bulbs). Use 0.8–0.9 for motors and most AC equipment.
- Size Your Protection: The calculated amps is the continuous draw. Size breakers and fuses at 125% of continuous load per NEC requirements.