Трёхфазный Промышленный Мощность
Расчёты для тяжёлых промышленных систем. Обрабатывайте сложную векторную математику √3 для двигателей и распределительных щитов завода.
Промышленная конфигурация
Трёхфазный переменный ток
Результат обновляется в реальном времени по мере ввода параметров.
Текущий результат учитывает множитель линейного напряжения (√3 ≈ 1.732) и потери КПД системы. Подходит для проверки FLA двигателя.
Формулы трёхфазной мощности
Трёхфазная мощность обеспечивает на 73% больше мощности, чем однофазная при том же напряжении и токе — используя лишь один дополнительный проводник.
Активная мощность (кВт)
P = √3 × V × I × PF Коэффициент √3 (1.732) учитывает сдвиг фаз на 120° между тремя формами тока, что обеспечивает стабильную мгновенную подачу мощности.
Полная мощность (кВА)
S = √3 × V × I Полная мощность — это общая мощность, которую должен обеспечить источник питания независимо от коэффициента мощности. Используется для подбора трансформаторов и генераторов.
Understanding Three-Phase AC Power
Three-phase power is the standard for industrial and commercial electrical distribution. It consists of three sinusoidal voltages, each offset by 120°, that together produce a constant, smooth power delivery. This makes three-phase motors smoother and more efficient than single-phase equivalents — and allows a given amount of power to be transmitted with less conductor material.
Why √3 (1.732)?
The three-phase power formula uses the square root of 3 because of the vector relationship between line voltage and phase voltage. In a balanced three-phase system, line-to-line voltage (V_LL) equals √3 times the line-to-neutral phase voltage (V_LN). For example, 208V line-to-line corresponds to 120V phase voltage (208 ÷ 1.732 ≈ 120).
Three-Phase Advantages
- Constant Power Delivery: The three phases sum to a constant total at every instant — unlike single-phase which pulses at twice the supply frequency. This makes motors run smoother with less vibration.
- Higher Power Density: A three-phase system delivers 73% more power than single-phase at the same conductor size and voltage, making it far more economical for large loads.
- Simpler Large Motor Design: Three-phase induction motors have no starting capacitors or split-phase windings — the rotating magnetic field forms naturally from the three phases.
- Lower Neutral Current: In a balanced three-phase system, the neutral conductor carries zero current, saving conductor material in distribution systems.
Common Three-Phase Voltages
- 208V / 120V: US commercial — line-to-line / line-to-neutral. Common in office buildings and light industrial.
- 480V / 277V: US industrial standard. Used for large motors, HVAC, and industrial equipment.
- 400V / 230V: International (IEC) standard across most of Europe, Asia, and Australia.