Ampere ad Watt Calcolatrice
Determina rapidamente quanti watt consuma il tuo dispositivo inserendo la lettura in ampere e la tensione in ingresso. Essenziale per misurare l'efficienza dei piccoli elettrodomestici.
Calcolatore di Consumo
Ampere → Watt
Misurazione della potenza attiva utilizzata dal carico.
La Formula di Conversione
Il calcolo della potenza dipende dal tipo di circuito — il fattore di potenza è richiesto per tutti i sistemi CA.
Sistemi CC
W = I × V L'equazione fondamentale della potenza — ampere per volt è uguale a watt in tutti i circuiti CC.
CA Monofase
W = I × V × PF Il fattore di potenza tiene conto della differenza di fase tra tensione e corrente, riducendo la potenza reale effettiva.
CA Trifase
W = √3 × I × V × PF La potenza trifase equilibrata si somma su tutte e tre le fasi con il coefficiente √3 (1,732) per la tensione di linea.
How to Convert Amps to Watts
Converting amperes to watts tells you how much real power a device consumes. This is essential for calculating energy costs, sizing generators, verifying circuit capacity, and comparing appliances. Multiply amps by volts — then apply the power factor for AC systems.
Real Power vs. Apparent Power
Real power (watts) is energy that actually does work — turning a motor, heating an element. Apparent power (VA) is what the supply delivers including reactive current. For heaters and lamps they're equal. For motors and transformers, watts are always lower than VA because some current builds magnetic fields without doing useful work.
Practical Applications
- Energy Cost Calculation: Convert amps to watts, multiply by hours of use to get Wh, divide by 1000 for kWh, then multiply by your electricity tariff.
- Generator Sizing: Sum the watts of all simultaneous loads and add 25% for motor startup surges.
- Circuit Load Audit: Sum all load watts on a circuit. The total should not exceed 80% of the breaker rating × voltage (NEC continuous load rule).
Step-by-Step Conversion
- Read the Current: Measure with a clamp meter or find the amp rating on the device nameplate.
- Note the Voltage: Check your supply — 120V or 240V in North America; 230V in most of Europe.
- Apply Power Factor: Use 1.0 for pure resistive loads. Use 0.8–0.9 for motors and inductive equipment.
- Multiply: I × V for DC; I × V × PF for single-phase AC; √3 × I × V × PF for three-phase AC.