Amps से वाट कैलकुलेटर
अपना एम्पीयर रीडिंग और इनकमिंग वोल्टेज दर्ज करके तुरंत जानें कि आपका डिवाइस कितने वाट उपयोग करता है। छोटे उपकरणों की दक्षता मापने के लिए आवश्यक।
खपत कैलकुलेटर
एम्पीयर → वाट
लोड द्वारा उपयोग की जा रही सक्रिय शक्ति का माप।
कन्वर्जन फॉर्मूला
पावर गणना आपके सर्किट प्रकार पर निर्भर करती है — सभी AC सिस्टम के लिए पावर फैक्टर आवश्यक है।
DC सिस्टम
W = I × V मौलिक पावर समीकरण — एम्पीयर गुणा वोल्ट सभी DC सर्किट में वाट के बराबर है।
1-फेज़ AC
W = I × V × PF पावर फैक्टर वोल्टेज और करंट के बीच फेज अंतर को दर्शाता है, जिससे प्रभावी वास्तविक शक्ति कम हो जाती है।
3-फेज़ AC
W = √3 × I × V × PF थ्री-फेज संतुलित शक्ति तीनों फेज में जुड़ती है, लाइन वोल्टेज के लिए √3 (1.732) गुणांक के साथ।
How to Convert Amps to Watts
Converting amperes to watts tells you how much real power a device consumes. This is essential for calculating energy costs, sizing generators, verifying circuit capacity, and comparing appliances. Multiply amps by volts — then apply the power factor for AC systems.
Real Power vs. Apparent Power
Real power (watts) is energy that actually does work — turning a motor, heating an element. Apparent power (VA) is what the supply delivers including reactive current. For heaters and lamps they're equal. For motors and transformers, watts are always lower than VA because some current builds magnetic fields without doing useful work.
Practical Applications
- Energy Cost Calculation: Convert amps to watts, multiply by hours of use to get Wh, divide by 1000 for kWh, then multiply by your electricity tariff.
- Generator Sizing: Sum the watts of all simultaneous loads and add 25% for motor startup surges.
- Circuit Load Audit: Sum all load watts on a circuit. The total should not exceed 80% of the breaker rating × voltage (NEC continuous load rule).
Step-by-Step Conversion
- Read the Current: Measure with a clamp meter or find the amp rating on the device nameplate.
- Note the Voltage: Check your supply — 120V or 240V in North America; 230V in most of Europe.
- Apply Power Factor: Use 1.0 for pure resistive loads. Use 0.8–0.9 for motors and inductive equipment.
- Multiply: I × V for DC; I × V × PF for single-phase AC; √3 × I × V × PF for three-phase AC.