kW ad Volt Calcolatrice
Determina il livello di tensione richiesto quando conosci il consumo di energia e il flusso di corrente massimo. Fondamentale per la pianificazione della distribuzione e la configurazione dei trasformatori.
Scoperta della Tensione
Potenza + Corrente → Tensione
Differenza di potenziale necessaria per erogare la potenza target.
La Formula di Conversione
Il calcolo della tensione dipende dal tipo di circuito: la fase e il fattore di potenza cambiano notevolmente il calcolo.
Sistemi CC
V = (kW × 1000) ÷ I Potenza semplice divisa per la corrente. Utilizzato per banchi di batterie, pannelli solari e circuiti CC.
CA Monofase
V = (kW × 1000) ÷ (I × PF) Standard residenziale e commerciale leggero. Il fattore di potenza tiene conto dei carichi reattivi come i motori.
CA Trifase
V = (kW × 1000) ÷ (√3 × I × PF) Standard industriale. Il fattore √3 (1,732) è obbligatorio per tutti i calcoli di tensione concatenata trifase.
How to Convert kW to Volts
Calculating voltage from power and current is a fundamental electrical task — useful when verifying system design, checking nameplate data, or troubleshooting circuits. Because voltage, current, and power are linked by Ohm's Law and power equations, you need to know both the power in kilowatts and the current in amps to solve for voltage.
Key Takeaway
Higher voltage at the same power means less current flows. This is why transmission lines run at hundreds of thousands of volts — thin wires can carry enormous power with minimal resistive loss when current is kept low.
Step-by-Step Conversion Guide
- Identify the Power: Read the kW rating from your device or system specification sheet.
- Find the Current: Locate the ampere rating on the equipment nameplate or measure it with a clamp meter.
- Determine Circuit Type: Is it DC, single-phase AC (residential), or three-phase AC (industrial)?
- Apply the Power Factor: For AC circuits, locate the power factor (PF) on the nameplate — typically 0.8–0.95 for motors and 1.0 for purely resistive loads.
- Calculate: Divide (kW × 1000) by the appropriate denominator based on your circuit type.
Common System Voltages
- 12V / 24V / 48V: DC systems — automotive, solar, telecom, and battery storage.
- 120V / 240V: North American residential single-phase AC (split-phase).
- 208V / 480V: US commercial and industrial three-phase AC.
- 230V / 400V: European and international single-phase and three-phase standards.