Panel Surya Susunan Penentuan Ukuran
Tentukan jumlah total panel fotovoltaik yang diperlukan untuk memenuhi kebutuhan energi harian spesifik Anda.
Data Konsumsi
Penentuan Ukuran Susunan Panel
Perhitungan kami mencakup Faktor Kehilangan standar 1,25 (25%) untuk memperhitungkan konversi inverter, resistansi kabel, dan variasi suhu.
Rumus Penentuan Ukuran
Jumlah panel bergantung pada kebutuhan energi Anda, sinar matahari yang tersedia, dan daya masing-masing panel.
Daya Susunan yang Diperlukan
kW = (Daily kWh ÷ Sun Hours) × 1.25 Faktor kehilangan 1,25 mencakup penurunan akibat panas, resistansi kabel, dan kehilangan konversi inverter yang mengurangi output di dunia nyata.
Jumlah Panel
Panels = ⌈(kW × 1000) ÷ Panel Watts⌉ Selalu bulatkan ke atas ke bilangan bulat berikutnya — sebagian kecil panel menghasilkan daya nol.
How to Size a Solar Panel Array
Sizing a solar panel array correctly ensures your system produces enough electricity every day without overspending on excess capacity. The three core variables are daily energy consumption (kWh), peak sun hours at your location, and the wattage rating of each panel.
What Are Peak Sun Hours?
A peak sun hour equals one hour of sunlight at 1,000 W/m² intensity. Most US locations average 4–6 peak sun hours daily. Northern and coastal areas typically see 3.5–4 hours, while the desert Southwest can exceed 6. Always use local solar irradiance data for the most accurate sizing.
Step-by-Step Sizing Guide
- Measure Your Daily Usage: Check your electricity bill for monthly kWh and divide by 30. Add 15–20% buffer if you plan to add appliances later.
- Find Your Peak Sun Hours: Look up your location's solar resource data. The default of 4.5 hours is a safe conservative estimate for most temperate regions.
- Choose a Panel Wattage: Modern residential panels range from 300W to 450W. Higher-wattage panels reduce the number of panels needed for the same output.
- Apply the Loss Factor: Multiply your raw requirement by 1.25. Real-world systems consistently produce less than their rated capacity due to heat, shading, and conversion losses.
- Round Up the Count: Always round the panel count up to the next whole number to guarantee you meet your energy target.
Common Sizing Mistakes to Avoid
- Ignoring seasonal variation: Size for your worst month (typically December for northern climates), not the annual average.
- Skipping the loss factor: A 1:1 system will under-produce on hot days, cloudy periods, and as panels age.
- Using nameplate wattage alone: Panel output degrades 0.5–0.8% per year. Build in headroom for long-term performance.