Rendement Solaire Audit
Prévoyez la production énergétique de votre parc photovoltaïque. Analyse réaliste tenant compte des pertes système et de la densité solaire géographique.
Données du Système
Taille du Parc et Heures d'Ensoleillement
75% - 80% est typique pour les systèmes raccordés au réseau.
Le résultat se met à jour en temps réel au fur et à mesure que vous saisissez les paramètres.
La Formule de Production
Le rendement de l'énergie solaire dépend de la capacité nominale de votre parc et du nombre d'heures d'ensoleillement productives que reçoit votre emplacement.
Rendement Énergétique Quotidien
kWh/day = kWp × Sun Hours × Eff kWp est la puissance maximale de votre parc en kilowatts. L'efficacité (généralement 0,75–0,85) tient compte des pertes de l'onduleur, du câble et de la température.
Rendement Annuel
Annual kWh = Daily kWh × 365 Utilisez le rendement annuel pour calculer la compensation CO₂, les économies par rapport au coût de l'électricité du réseau, et la période de retour sur investissement de votre installation solaire.
How to Estimate Solar Panel Output
Knowing how much energy your solar system will actually produce is the foundation of any solar investment decision. The theoretical output of your panels (kWp) is always higher than real-world production — temperature, shading, inverter losses, and dust all reduce actual yield. This calculator applies a realistic efficiency factor to give you an honest production estimate.
Performance Ratio: The Key Metric
Performance Ratio (PR) is the ratio of actual energy output to theoretically possible output — the single best measure of a solar system's real-world efficiency. A well-installed system typically achieves a PR of 0.75–0.85. Losses come from inverter conversion (3–5%), cable resistance (1–2%), soiling (2–5%), temperature derating (5–10%), and shading (variable).
Factors That Affect Solar Output
- Peak Sun Hours: The most location-dependent variable. Phoenix, AZ sees ~6.5 peak sun hours; Seattle, WA averages ~3.5. Use your local solar irradiance data for accuracy.
- Panel Temperature: Solar panels lose approximately 0.4% of output per degree Celsius above 25°C (STC). A panel at 65°C on a hot day produces ~16% less than its rating.
- Shading: Even partial shade on one panel can significantly reduce the output of the entire string in traditional string inverter systems. Microinverters or DC optimizers mitigate this.
- Panel Orientation and Tilt: In the northern hemisphere, south-facing panels at a tilt angle equal to your latitude angle produce the maximum annual yield.
- Panel Degradation: Panels lose approximately 0.5–0.7% of output per year. A 25-year-old panel typically produces 80–85% of its original rating.
Calculating Solar Payback Period
Divide the total installation cost by the annual electricity savings (Annual kWh × electricity rate). A 5kWp system at $10,000 producing 6,500 kWh/year at $0.15/kWh saves $975/year — a simple payback of about 10.3 years, with 15+ years of free energy afterward.