Ampères en Puissance en Chevaux Calculateur
Calculez inversement la puissance de sortie de votre moteur en chevaux en fonction du courant qu'il consomme sur la ligne. Parfait pour vérifier les spécifications des équipements sur le terrain.
Audit de Puissance du Moteur
Ampérage → HP de Sortie
Puissance à l'arbre en fonction de l'entrée électrique.
La Formule de Conversion
La puissance de sortie du moteur est calculée à partir de l'entrée électrique — le rendement et le facteur de puissance déterminent la quantité d'énergie transformée en travail mécanique.
Moteurs CC
HP = (I × V × Eff) ÷ 746 La puissance électrique d'entrée (I × V) multipliée par le rendement donne les watts de sortie, qui sont divisés par 746 pour obtenir les chevaux.
Moteurs CA Monophasés
HP = (I × V × Eff × PF) ÷ 746 Les moteurs CA nécessitent un facteur de puissance — seule la partie de puissance réelle (V × I × FP) se transforme en sortie mécanique.
Moteurs CA Triphasés
HP = (√3 × I × V × Eff × PF) ÷ 746 Le facteur √3 tient compte de la répartition de la puissance sur trois phases. Les moteurs triphasés délivrent plus de puissance par ampère que les monophasés.
How to Convert Amps to Horsepower
Converting amps to horsepower lets you determine a motor's mechanical output from its electrical input measurements. This is useful when the motor nameplate is damaged or missing, when verifying motor performance, or when comparing measured current draw to the rated HP. The key insight: not all electrical input becomes mechanical output — efficiency and power factor dictate how much is lost as heat.
Understanding Motor Efficiency
Motor efficiency is the ratio of mechanical output power to electrical input power. A 5 HP motor drawing 15A at 240V and 0.85 PF consumes about 3,060W of real input power. At 90% efficiency, it delivers 2,754W (≈ 3.69 HP) of mechanical output. The rest becomes heat in the windings. Premium-efficiency motors minimize this loss.
When to Use This Calculation
- Verifying Motor Output: Measure FLA with a clamp meter and calculate HP to confirm the motor is delivering its rated output.
- Troubleshooting Overloads: If the calculated HP is significantly below rated, the motor may be worn, undersized, or operating with a degraded power factor.
- Pump and Fan Selection: When replacing driven equipment, knowing actual HP output (not just nameplate) prevents under-sizing the new load.
- Energy Audits: Calculate actual HP output versus nameplate rating to identify inefficient motors worth replacing with premium-efficiency units.
Step-by-Step Conversion
- Measure or Find the Current: Use a clamp meter for measured FLA, or use the nameplate value.
- Note the Supply Voltage: Use line-to-line voltage for three-phase; line-to-neutral for single-phase.
- Multiply by Efficiency: Motor efficiency in decimal form (85% = 0.85).
- Multiply by Power Factor (AC): Typical induction motors run 0.80–0.92 PF at full load.
- Divide by 746: Convert watts to horsepower using the 746 W/HP constant.